Oppo F1s Firmware Flash File 100% Tested Without Password

Oppo F1s Firmware Flash File 100% Tested Without Password

Without Password

Lava Iris 350m Firmware Flash File 100% Tested Without Password

Lava Iris 350m Android 4.2 Firmware Flash FileLava Iris 350m Android 4.2 Firmware Flash File

Lava Iris 350m Android 4.2 Firmware Flash File

Initial Steps to Install Firmware on Lava Iris 350m  

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Iris 350m 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait
Download Link

Lava Iris X9 Firmware Flash File 100% Tested Without Password

 Lava Iris X9 MT6582 Android 4.4.2 Firmware Flash FileLava Iris X9 MT6582 Android 4.4.2 Firmware Flash File

Lava Iris X9 MT6582 Android 4.4.2 Firmware Flash File

Initial Steps to Install Firmware on Lava Iris X9 

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Iris X9

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait
Download Link

Lava Iris 349i Firmware Flash File 100% Tested Without Password

Lava Iris 349i Android Gingerbread 2.3.6 Firmware Flash FileLava Iris 349i Android Gingerbread 2.3.6 Firmware Flash File

Lava Iris 349i Android Gingerbread 2.3.6 Firmware Flash File

Initial Steps to Install Firmware on Lava Iris 349i  

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Iris 349i 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait.
  15. See detailed Instruction MT flashing sp tool with imges

Download Link

Lava Iris 404 Flair Firmware Flash File 100% Tested Without Password

Lava Iris 404 Flair MT6572 Android 4.4.2 KitKat Firmware Flash File

Lava Iris 404 Flair MT6572 Android 4.4.2 KitKat Firmware Flash File

Initial Steps to Install Firmware on Lava Iris 404 Flair 

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Iris 404 Flair 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait
Download Link

Lava Iris 352E Firmware Flash File 100% Tested Without Password

Lava Iris 352E MT6572 Android 4.2 Firmware Flash File

Lava Iris 352E MT6572 Android 4.2 Firmware Flash File

Initial Steps to Install Firmware on Lava Iris 352E  

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Iris 352E 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait.
Download Link

Lava Ivory M4 Firmware Flash File 100% Tested Without Password

Lava Ivory M4 Android 5.1 Lollipop Firmware Flash FileLava Ivory M4 Android 5.1 Lollipop Firmware Flash File

Lava Ivory M4 Android 5.1 Lollipop Firmware Flash File

Initial Steps to Install Firmware on Lava Ivory M4   

  1. Download and install MTK  android USB drivers
  2. Download And Install SP Flash Tool

How To Flash Lava Ivory M4 

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  android USB drivers
  3. Then download Firmware file/Flash file/Rom for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off yourmobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smart phone with a USB cable and press volume up or volume down key for easy detection (remove and re insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts and might take up to 5-10 minutes. So keep patience and wait
Download Link

Like Us Facebook

Related Posts Plugin for WordPress, Blogger...